Pure Copper Connector Sealed Connection Method

Next, I will introduce the mechanical sealing connection method of Pure Copper Connector in detail. (1) mechanical sealing connection of copper pipe
1) Sleeve connection: It is a relatively simple construction method, simple operation, convenient to master, is a common connection method in construction, as long as the pipe incision end face can be kept perpendicular to the pipe axis, and the burr at the incision is cleaned up, the clamp position is correct when fitting, and the nut is tightened, it can realize the tight connection of copper pipe. Mainly suitable for the connection of semi-hard copper pipe with diameter less than 50mm.
2) Plug-in connection: As long as the end face of the incision can be kept perpendicular to the axis of the pipe and the burr is removed, the pipe fitting can be forcibly inserted into the end. This connection method is based on the stainless steel clamping ring in the special pipe fitting. The steel wall is confined in the pipe fitting, and the sealing is implemented by the rubber ring in the pipe fitting closely matched with the outer wall of copper pipe. Mainly suitable for connection of copper pipe diameter less than 25mm.
3) Crimping connection: a more advanced construction mode, the operation is relatively simple, but it needs to be equipped with special and complete specifications of crimping machinery. When connecting, the cut end face of the pipe is perpendicular to the axis of the pipe, and the burr of the pipe is removed, and then the pipe is inserted into the bottom of the pipe fitting, and then the copper pipe and pipe fitting are pressed into one with the crimping machine. This connection method is to use the rubber ring in the flange of the pipe fitting to implement the seal, mainly suitable for the connection of copper pipe diameter less than 50mm.