Precautions for the use of semiconductor quick connectors

Mainly used in semiconductor and fluororesin semiconductor production equipment. The main body material should be corrosion-resistant metal or injection-molded fluororesin (PFA) full-resin products.

Precautions for use:

Notice

For the fluid, carry out the dissolution test of the sealing material to confirm whether the material is suitable.

Use Teflon sealing tape on the external thread of the control thread.

Do not exceed the maximum tightening torque when installing threads to prevent damage.

In order to reduce friction (insertion load) and protect the "O" ring when inserting, apply fluid or pure water to the "O" ring or quick connector ("O" ring folded part).

When separating, because a small amount of fluid flows out, compressed air can be used to discharge and separate the fluid inside the quick connector in order to prevent danger.

Please do not use as hinge joints.

Please do not use it for purposes other than quick fluid connectors.

Do not artificially hit, bend, stretch, and prevent damage.

Please do not pressurize the bushing or quick connector to prevent the valve from flying out.

The specified dust cover must be installed when the unit is used alone.

Do not disassemble the quick connector.