Stainless Steel Fast Twist Joint

Name: Stainless steel 304/316The ferrule joints/ stainless steel Fast twist joint/hydraulic joints

The performance of the ferrule type pipe joint is not only related to the material of the part, manufacturing accuracy, heat treatment, etc., but also the relationship with the quality of the assembly. Therefore, it should be assembled as follows.

1. Cut the pipe on the special machine according to the required length, or you can cut it by hand. The tangent plane and the center line of the pipe should not be more than half of the difference.

2. Remove the inner and outer round burrs, metal shavings and dirt from the pipe end.

3. Remove the anti-rust oil and dirt from each part of the pipe joint.

4. Put the curtain in order, put the ferrule on the tube, then insert the tube into the bottom of the taper hole in the connector body, and place the ferrule. while tightening the nut, turn the tube until it stops, and then tighten the nut 1 ~1 1/3 turns.

Features: The ferrule joint has the characteristics of reliable connection, high pressure resistance, good sealing and repeatability, convenient installation and maintenance, and safe and reliable work.

(1) Single stainless steel Fast twist joint protected by pearl wool, in a bag.

(2) A carton for multiple bags.

(3) Multiple cartons on a pallet.

(4) Stretch film winding pallet before package.

(5) Special products can be customized.