Precautions for the use of inert gas quick connectors

To be used for vacuum piping, compressor pressure test. Both the sleeve and the plug have built-in automatic on-off valves suitable for vacuum use, and can maintain a vacuum degree of 1.3×10Pa in the separated state.

Precautions for use:

Warn

Do not exceed the maximum working pressure limit when using.

Do not use it outside the operating temperature range to prevent wear or leakage of the sealing material.

Do not artificially hit, bend, stretch, and prevent damage.

Do not separate the connection under pressurized or residual pressure.

Please do not disassemble.

Notice

Use the sealing material for the external thread of the control thread.

Do not artificially hit, bend, stretch, and prevent damage.

Do not use for fluids other than the applicable fluids.

Please do not use it for purposes other than quick connectors.

Do not connect with other company's quick fluid couplings.

Do not use in places where metal powder or sand dust is mixed to prevent poor work or leakage.

Such as attachment of sundries will cause poor work or leakage.

The brake valve must be set before the quick connector.

Please do not use as a hinge joint.

If it is used in a machine with vibration and impact, the durability will be reduced.